Study on the microstructure and tensile properties of GH5188 high-temperature alloy laser welded joints
W.-Q. Song, Xu Wang, Guili Liu, Yong Du, Ning Zhang
Aero Engine Corporation of China (China) Shenyang University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
GH5188 high-temperature alloy has excellent mechanical properties and oxidation resistance and is used in the aerospace field and other harsh working environments. Tension and creep are the main failure modes during component operation. Hence, this work systematically characterizes and discusses the microstructure and properties of the welded joints. The results indicate that the weld metal of GH5188 alloy is mainly composed of long columnar grains, equiaxed dendrites, and carbides in a stable microstructure. Welding heat-affected zone grains are dominated by austenitic grains. Carbides are mainly divided into the two types M 6 C and M 23 C 6 , widely distributed in the weld and heat-affected zone on the grain boundary. The microstructure after the tensile fracture was tested, and the main cause for the fracture of the joint was found to be carbide in the weld structure. The average ultimate tensile strength for the laser welded joints at room temperature is 936.7 MPa and the average elongation after fracture is 19.25 %. The welded joint sample was kept at a temperature of 927 °C with a fixed load of 76 MPa for 36 hours without fracture. In this work, the requirements of relevant enterprises could be met and theoretical support for practical applications could be provided.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程High Temperature Alloys and Creep
Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes