Reproducibility of Direct Shear Tests Conducted on Granular Backfill Materials
Christopher A. Bareither, Craig H. Benson, Tuncer B. Edil
University of Wisconsin–Madison
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Intra-laboratory and inter-laboratory testing was conducted to assess the bias, repeatability, and reproducibility of the shear strength of compacted granular backfill materials tested in direct shear using AASHTO T 236. Inter-laboratory testing was conducted by ten laboratories using four granular backfill materials. Triaxial compression tests were also conducted on the granular backfill materials to establish a reference friction angle (ϕ′) for computing bias. Comparison of failure envelopes and friction angles from the intra-laboratory study showed that the test method is highly repeatable (ϕ′±0.1°) when conducted in a single laboratory by a single operator using the same equipment. In contrast, data from the inter-laboratory study showed high variability in the failure envelopes and friction angles, with ϕ′ varying by as much as 18.2° for a given backfill. Analysis of the data from the inter-laboratory study showed that the reproducibility of direct shear tests on granular backfill is 8.8°. The bias in ϕ′ is −2.5° when area corrections are not applied and −1.5° when area corrections are applied.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Geotechnical Engineering and Soil Mechanics
Geotechnical Engineering and Soil Stabilization · Geotechnical and construction materials studies