On the Phases Present in Artificially Aged AA2618 Extrusions
Ashim Kumar Mukhopadhyay, R. Sarkar, Devesh Kumar, Partha Ghosal
Defence Metallurgical Research Laboratory Defence Research and Development Organisation
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The aluminum alloy AA2618, based on aluminum–copper–magnesium–silicon–iron–nickel, is successfully utilized at elevated temperatures, i.e., in the temperature range of 100°C–300°C, for varying durations for critical aerospace applications. The intermetallic compound Al9FeNi (having the monoclinic crystal structure) forms early during the solidification process, and this compound is known to assist in stabilizing the grain structure of the alloy. This work shows that during subsequent homogenizing, annealing, and thermo-mechanical processing, the Al9FeNi compound becomes unstable and acts as a nucleation site for the stable Al7Cu2(FeNi) phase (having a tetragonal crystal structure). It is further observed that in the artificially aged condition, both Guinier–Preston–Bagaryatsky zones and S (Al2CuMg) phase co-exist. However, the S phase is found to form copiously parallel to {110}Al crystallographic planes apart from its known habit planes of {210}Al.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Aluminum Alloy Microstructure Properties
Metallurgical and Alloy Processes · Magnesium Alloys: Properties and Applications