Properties of SiC Ceramics Sintered via Liquid Phase Using Al2O3 + Y2O3, Al2O3 + Yb2O3 and Al2O3 + Dy2O3 as Additives: a Comparative Study
S. Ribeiro, Giseli Cristina Ribeiro, Marcela Rego de Oliveira
Universidade de São Paulo
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Silicon carbide (SiC) ceramics show excellent performance at high temperatures. Due to the high covalence of Si-C bonds, these ceramics are produced successfully only via liquid phase sintering (LPS). In this work, SiC ceramics were sintered via LPS using eutectic mixtures of Al2O3+Y2O3, which served as a standard for comparison, Al2O3+Yb2O3 and Al2O3+Dy2O3. The oxides mixtures were used to form liquid phase during the SiC sintering. Mixtures of SiC and additives were ground, pressed at 300 MPa and sintered at 1950ºC for 2 hours. All mixtures showed similar hardness, fracture toughness and flexural strength slightly different. Also the microstructure and crystalline phase were similar, showing that the ytterbium's and dysprosium's oxides can be also used as additive as well the most used oxide, yttrium oxide.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Advanced ceramic materials synthesis
Silicon Carbide Semiconductor Technologies · Advanced materials and composites