COMPARATIVE STUDIES ON MICROSTRUCTURE AND TOUGHNESS OF 9 % Ni STEEL JOINTS WELDED BY SMAW AND GTAW
Haiyang Zhu, Xuebing Yang, Kun Liu, Xiaoyong Wang, Yuhang Du, Jiasheng Zou
Jiangsu University of Science and Technology Kanadevia (Japan)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The microstructure and impact toughness of 9 % Ni steel joints welded by shielded metal arc welding (SMAW) and gas tungsten arc welding (GTAW) were investigated. The two kinds of weld metal were mainly composed of cellular dendrites and a granular precipitated phase. The grains and cellular dendrites of the GTAW weld metal were smaller than those of the SMAW weld metal. The precipitates in the SMAW weld metal were stripe-shaped while those in the GTAW weld metal were rod-shaped; the number of precipitates in the GTAW weld metal was lower than in the SMAW weld metal. The low-temperature impact toughness of the GTAW weld metal was better than that of the SMAW weld melt.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Welding Techniques and Residual Stresses
Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties