Stochastic Finite‐Fault Modeling of Ground Motion for the 2010 Rigan Earthquake, Southeastern Iran
Maryam Safarshahi, Mehdi Rezapour, Hamzehloo Hosein
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
We studied the 20 December 2010 Rigan earthquake that occurred in southeastern Iran, using the ground‐motion simulation based on the stochastic finite‐fault model. This earthquake was recorded by 23 stations. The method requires region‐specific attenuation and generic site parameters. We first found an empirical function to describe the amplitude decay with distance of shear waves in the Rigan region of Iran. This function results from the analysis of spectral amplitudes of horizontal components from digital records from the Rigan earthquakes. The value of Q S shows a dependence on frequency in the range of 1–24 Hz for the Rigan region. The average frequency‐dependent relationship estimated for the region is Q S =(99±19) f (0.58±0.12) . We then obtained a spectral decay parameter from the slope of smoothed amplitude of the Fourier spectra of acceleration at higher frequencies. The estimated zero‐distance Kappa value is 0.06. In the next step, we used these approximate values and the stochastic finite‐fault model in an iterative manner to optimally model the strong ground motion and rupture characteristics of the main event in terms of peak ground acceleration, peak ground velocity, peak ground displacement, Arias intensity, the amplitude Fourier spectra, and the response spectra of ground shaking. We compared our simulated results with recorded ones in both the frequency and time domain. Our near‐field estimates for the main event is in good conformity with the corresponding near‐field estimates reported by other studies.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Seismic Performance and Analysis
earthquake and tectonic studies · Seismic Waves and Analysis