Improving the efficiency of aviation turbofan engines by using an intercooler and a recuperative heat exchanger
Hewa Hussein Omar, Венедикт Степанович Кузьмичев, Andrey Yu. Tkachenko
Samara National Research University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Continuous improvement of fuel efficiency of aircraft engines is the main global trend in modern engine construction. To date, aviation gas turbine engines have reached a high degree of thermodynamic and design-and technology perfection. One of the promising ways to further improve their fuel efficiency is the use of complex thermodynamic cycles with turbine exhaust heat regeneration and with intermediate cooling in the process of air compression. Until recently, the use of cycles with a recuperative heat exchanger and an intercooler in aircraft gas turbine engines was restrained by a significant increase in the mass of the power plant due to the installation of heat exchangers. Currently, it has become technologically possible to create compact, light, high-efficiency heat exchangers for use on aircraft without compromising their performance. An important target in the design of engines with heat recovery is to select the parameters of the working process that provide maximum efficiency of the aircraft system. The article focuses on the statement of the task of optimization and choice of rational parameters of the working process of a bypass three-shaft turbojet engine with an intercooler and a recuperative heat exchanger. On the basis of the developed method multi-criteria optimization was carried out by means of numerical simulations. The results of optimization of thermodynamic cycle parameters of a bypass three-shaft turbojet engine with an intercooler and a recuperative heat exchanger in the aircraft system according to such criteria as the total weight of the engine and fuel required for the flight, and the aircraft specific fuel consumption per ton - kilometer of the payload are presented. A passenger aircraft of the Airbus A310-300 type was selected. The developed mathematical model for calculating the mass of a compact heat exchanger, designed to solve optimization problems at the stage of conceptual design of the engine is presented. The developed methods and models are implemented in the ASTRA program. The possibility of improving the efficiency of turbofan engines due to the use of complex thermodynamic cycles is shown.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Turbomachinery Performance and Optimization
Thermodynamic and Exergetic Analyses of Power and Cooling Systems · Aerospace Engineering and Applications