Design and Prototyping for Diamond-II Stripline Kickers
Alun Morgan, Arash Amiri, Ian Martin, Lorraine Bobb, Vitalii Zhiltsov
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Diamond-II will require two types of stripline kickers during normal operation: the kicker actuators for the transverse multibunch feedback system; and the injection stripline kickers which enable transparent injection. Both are very similar in design as they need to kick individual bunches without disturbing the following bunches. The main difference is the voltage requirements. The feedback kicker is expected to be driven with a maximum peak voltage of ~100 V using a broadband power amplifier, whereas the injection stripline kicker is driven with a trapezoid voltage signal with a maximum peak voltage of 20 kV using a dedicated power supply. This paper will describe the design and prototyping for both stripline kickers along with discussion of the required steps to get to final designs for each type.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
物理Particle accelerators and beam dynamics
Particle Accelerators and Free-Electron Lasers · Pulsed Power Technology Applications