车规级芯片封装界面可靠性研究进展
Fanghui Sheng, Pengjian Liang, 宝光 马, 杨晶磊, 戴恩期, 兴森 李
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
控制芯片作为汽车电子控制单元(ECUs)的核心部件,其封装可靠性直接影响整车安全性能。针对微控制单元(MCU)与系统级芯片(SoC)两类主流架构,基于汽车典型工况下的机械振动与温度冲击复合载荷特征,系统研究了封装界面分层失效机制。研究表明:在多载荷耦合作用下,贴片界面、引线键合界面及底部填充胶界面等关键部位的性能退化导致的界面粘接强度衰减与材料热失配效应是诱发分层失效的主导因素。通过对比虚拟裂纹闭合技术(VCCT)、J积分法及内聚力模型(CZM)的数值模拟适用性,表明CZM在非线性材料大变形条件下具有界面失效表征优势,J积分则适用于非线性材料小变形断裂领域,而VCCT在线弹性稳态裂纹扩展分析中更具计算效率优势。 Packaging reliability of control chips, which serve as the central components of Electronic Control Units(ECUs), directly affects the safety performance of automobiles. This paper systematically investigates the mechanism of delamination failure of two mainstream ECU architectures namely Microcontroller Unit(MCU) and System-on-Chip(SoC) based on composite load characteristics of mechanical vibration and temperature shock under typical conditions of automobile. The research results indicate that under multi-load coupling, interface bonding strength attenuation and thermal mismatching of materials caused by performance degradation of key positions like die attach interface, wire bond interface and underfill packing layer are the primary factors inducing delamination failure. This paper compares the application of three finite element analysis techniques—Virtual Crack Closure Technique(VCCT), J-integral, and Cohesive Zone Model(CZM), which indicates that CZM has interface representational dominance under large deformation condition of nonlinear material, while J-integral is applicable to small deformation fracture zone of nonlinear material, and VCCT has advantages in computational efficiency in the analysis of linear elastic steady-state crack propagation.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Electronic Packaging and Soldering Technologies
Mechanical Behavior of Composites · 3D IC and TSV technologies