A Critical Review of Sand Control Evaluation Testing for SAGD Applications
Jesus David Montero Pallares, Salomao Chissonde, Omar Kotb, Chun-Pu Wang, Morteza Roostaei, Alireza Nouri, M. Mahmoudi, Vahidoddin Fattahpour
University of Alberta RGL Reservoir Management (Canada)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper presents a critical review of current evaluation techniques for the selection and design of sand control devices (SCD) for Steam Assisted Gravity Drainage (SAGD) wells. With the industry moving towards exploiting more difficult reservoirs, there is a need to review the current testing methods and assess their adequacy for sand control evaluation for different operational and geological conditions. In addition to a critical review of existing sand control testing approaches for SAGD, the paper also discusses the testing parameters in previous studies to evaluate their representativeness of the field conditions in terms of interstitial seepage and viscous forces, and flow geometry. Moreover, the paper reviews the analysis and results of sand control testing in the literature and assesses the sand control design criteria in terms of the level of acceptable sand production and plugging. Furthermore, the review evaluates the suitability of the sample size, sand preparation techniques, representation of the SCD in the testing, and experimental procedures. The review shows variations in the existing sand control testing in SAGD, in terms of not only approach, sand control representation, and sample size, but also regarding operational test conditions, such as flow rates and pressures. Ideally, large-scale pre-packed tests that include the effects of temperature and radial flow geometry would more closely emulate the actual conditions of SAGD wells than most existing tests allow. High temperatures may affect sanding and plugging through changes in wettability, permeabilities, and mineral alterations. Further, the varying velocity profile in radial flow towards the SCD influences the fines migration pattern differently from the linear-flow conditions in the existing Sand Retention Tests (SRT). However, large-scale radial-flow tests are constrained by cost and complexity. Most SRT experiments have employed high flow rates, exceeding the equivalent field rates. Utilizing realistic rates for the tests and appropriately capturing the actual fluids ratios, water cuts and steam breakthrough scenarios can improve the quality of testing data. Accordingly, existing SRT experiments can be designed to incorporate, if not all, but some of the relevant physics in SAGD by employing representative viscosities, flow rates, fluid properties and ratios, stress conditions and obtain suitable live and post-mortem measurements. This critical review compiles various aspects of current sand retention tests and evaluates their applicability to SAGD well conditions. It serves as a starting point for future research by providing an overview of existing testing methods, highlighting the strengths and opportunities for improvements.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Drilling and Well Engineering
Hydrocarbon exploration and reservoir analysis · Enhanced Oil Recovery Techniques
参考文献 71
此处列出前 3 条
引用本文 28
按被引量排序,此处列出前 3 条