Load recovery at fixed deflection after creep relaxation in bending as a test of anelastic back-stress laws
Yo-Lun Yang
National Taipei University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Creep-ageing models treat unloading as elastic, although part of the strain accumulated on the die keeps returning after release. A bending test is introduced in which a bar is unloaded to zero load after an eight-hour relaxation and the deflection is held for six hours while the load recovers, a response not previously recorded in bending. Eleven such tests on three thicknesses, with uniaxial recovery at zero stress and at fixed strain, give recovery under three conditions of constraint. A six-parameter back-stress law identified on three uniaxial creep and recovery histories is applied without refitting to the other two. The law describes the relaxation on the die, and the amplitude of the recovery transfers to bending, whereas the law returns the load at 1.3 to 3.5 times the measured half-time. The records after unloading determine the time scale of the recoverable strain, and the measured recovery saturates with hold duration where the law continues to rise. The dependence on hold duration has a candidate in a back-stress stiffness rising during the hold as the mobile dislocation density falls. For a die-clamped 5 mm section, the law projects a delayed springback of 16 to 18 % of the elastic springback after thirty days, and retaining that shape requires 10 to 42 % more die curvature than compensation at release. Recovery after unloading therefore provides a separate test for a constitutive law that is to predict the retained shape of a formed part.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Metal Forming Simulation Techniques
High Temperature Alloys and Creep · Metallurgy and Material Forming