Field test of blasting vibration and adjacent slope stability under the influence of blasting vibration in mining
Can Liu, Feifei Wang, Qingyang Ren, Bin Chen, Hong-hua Jin, Songjun Cui, Ziqiang Zhu
Hunan Urban Construction College Changsha Mining and Metallurgy Research Institute (China) State Key Laboratory Breeding Base of Mountain Bridge and Tunnel Engineering Chongqing Jiaotong University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Blasting mining in open-pit has a significant impact on the adjacent slope, which often causes the rock mass cracking and spalling of the slope to form a landslide disaster. In order to explore the impact of blasting vibration on the adjacent slope, field tests were carried out with professional testing equipment, and several blasting vibration data were measured. Sadovsky formula was used for fitting analysis, and the influence coefficient of blasting vibration was obtained. The slope stability analysis was carried out by using the limit equilibrium SLIDE analysis software, and the slope safety factor under the influence of blasting vibration was obtained. The results show that: The maximum blasting vibration speed monitored in this blasting is 2.1987 cm/s, and the main vibration frequency is 14.6484 Hz. Therefore, according to the standards in the regulations, the impact of this blasting on the slope meets the corresponding requirements. In this slope stability analysis, the blasting vibration influence coefficient K c = 0.032, when 40 m away from the final slope is used. Morgen Prince method and Spencer method generally have higher safety factors than Bishop method. The safety factor of the analysis section at the 45° slope angle is 1.217. The slope can maintain stability under the influence of blasting vibration.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Blasting Impact and Analysis
Geotechnical Engineering and Analysis · Geotechnical and Mining Engineering