Particle Removal from Liquid Phase Using Fine Gas Bubbles.
Xiaofeng Zheng, Peter Charles Hayes, Hae-Geon Lee
The University of Queensland Pohang University of Science and Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Cold model study was undertaken to investigate the particle removal from the liquid phase using fine gas bubbles. Fine gas bubbles were created by flowing water through a tube in which a constriction was implanted, and injecting air underneath the constriction. The strong turbulent conditions underneath the constriction warranted formation and dispersion of fine bubbles in the tube. It was found that the probability of attachment of particles to bubbles in the tube was unity. When the aggregates of particle/bubble were discharged into the bottom tank where an abrupt change occurred in their relative movements, large particles were detached from the bubbles due to high inertial force and penetrated into the liquid in the tank, while small particles were kept attached to the bubbles and quickly floated up to the free surface of the tank. Under the present experimental conditions, polystyrene particles smaller than 500×10-6m in diameter were mostly kept attached to the bubbles and floated up to the free surface of the bottom tank, while the ones larger than 500×10-6m were detached from the bubbles and remained in the tank, circulating with water. This was in good agreement with the results predicted by the mathematical model reported previously. The wettability of a particle with the liquid was found to be an important factor in determining the removal efficiency of particles by attachment to bubbles. It was demonstrated that the process employed in the present study can be an effective technique for removing non-metallic inclusions from molten metals such as steel.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Minerals Flotation and Separation Techniques
Metallurgical Processes and Thermodynamics · Particle Dynamics in Fluid Flows