Damage Evolution of Surrounding Rock during Blasting Excavation of Small-Spacing Tunnels Considering In-Situ Stress Effects
Jun Chen, Tao Zhang, Zhihai Zhang, Yuxuan Zhu, Along Cui
East China University of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In small-spacing tunnels excavated by the drill-and-blast method, the surrounding rock undergoes progressive damage accumulation and pillar destabilization of the central pillar under repeated dynamic disturbances.Nevertheless, most previous investigations either neglect rational in-situ stress equilibrium or lack quantitative assessment of the cavity effect.A numerical model was established via ABAQUS to reveal the damage evolution law of surrounding rock during blasting construction of tunnels with small-spacing under in-situ stress conditions, with the Gui'an Tunnel used as a case study.The Johnson-Holmquist II (JH-2) constitutive model was adopted to characterize the dynamic behavior of the surrounding rock, and equivalent blasting loads were generated to represent the blasting process.Parametric analyses were performed for different millisecond delay times (5 ms and 15 ms) and excavation advances (1 m and 3 m) to evaluate rock damage distribution and vibration response.A single-tunnel model was also established as a reference case to quantify the peak particle velocity (PPV) amplification effect caused by the adjacent tunnel cavity.The simulation results demonstrate that a 15 ms delay interval exhibits superior blasting performance relative to the 5 ms delay.When the excavation round is reduced to 1 m, the damage extent is markedly lower: the maximum damage depth at the crown declines from 4.1 m to 1.8 m, while that at the invert drops from 8.5 m to 2.8 m.In the small-spacing tunnel model, the PPV of the central rock pillar first decreases and then stabilizes with increasing distance from the blast source, but increases again near the cavity of the previously excavated tunnel.By contrast, the PPV at the corresponding locations in the single-tunnel model decreases continuously.The maximum difference between the two models is 15.44 cm•s -1 , confirming a pronounced cavity-induced amplification effect.These findings highlight the importance of in-situ stress equilibrium and quantitatively clarify the cavity-induced vibration amplification mechanism, providing evidence for optimizing blasting schemes and improving safety control in small-spacing twin tunnels.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Blasting Impact and Analysis
Rock Mechanics and Modeling · Tunneling and Rock Mechanics