Spent coffee grounds as multifunctional modifiers for triple-synergistic enhancement of Li 4 SiO 4 ceramic sorbents in high-temperature CO 2 capture

Practical deployment of Li4SiO4 as a high-temperature CO2 sorbent requires pelletization, which inevitably densifies the microstructure and imposes severe CO2 diffusion limitations. Conventional sacrificial pore-forming agents address this issue but remain single-purpose, serving solely as structural templates without conferring chemical benefits. Here, we demonstrate that spent coffee grounds (SCGs), an abundant food-industry waste, can serve as a single-source modifier that achieves three colocalized enhancements in Li4SiO4 pellets: hierarchical pore engineering, in situ K-doping, and oxygen vacancy generation. The thermal decomposition of SCG creates an interconnected hierarchical macroporous network that effectively reduces intraparticle CO2 diffusion resistance. Meanwhile, the mineral-rich SCG ash provides in situ potassium doping, generating a localized eutectic molten carbonate phase that accelerates liquid-phase ion transport. Crucially, the transient reducing atmosphere during biomass combustion introduces oxygen vacancies into the silicate lattice; density functional theory (DFT) calculations reveal that these vacancies serve as highly active CO2 adsorption sites with a strongly exothermic adsorption energy of −0.914 eV. Benefiting from this triple-synergistic enhancement, the SCG-modified sorbent (LSO-50) achieves a CO2 adsorption capacity of 0.275 g/g at 650 °C under 15 vol% CO2, representing a more than fourfold improvement over unmodified pellets. When further combined with Na2CO3 codoping to promote additional eutectic formation, the optimized sorbent (LSON-50) reaches 0.330 g/g, retains 0.284 g/g after 50 adsorption–desorption cycles, and exhibits robust mechanical stability (< 10% attrition loss). By colocating structural, chemical, and defect features within a single biomass-derived modifier, this work establishes a scalable waste-valorization route for high-performance, eco-friendly CO2 capture.