Load of the wagon-platform for transportation of bulk cargoes

Purpose. To substantiate the improvement of the load-bearing element of the wagon-platform for the possibility of transporting bulk cargoes. Methodology. In order to be able to transport bulk cargo on the wagon-platform, it is proposed to install a composite boiler module on it. In order to determine the dynamic load of the improved load-bearing structure of the wagon-platform, mathematical modeling was performed. The mathematical model formed by professor Bohomaz H.I. was used. However, within the framework of the research this model was refined to determine the load of the wagon-platform of the proposed design. The solution of the system of differential equations is carried out in the MathCad software package. To do this, the mathematical model was reduced to the normal Cauchy form, and then integrated by the Runge-Kutta method. The obtained acceleration is taken into account when calculating the strength of the advanced load-bearing structure of the wagon-platform. The calculation is performed in the SolidWorks Simulation software package, which implements the finite element method. Also, within the research the modal analysis of a load-bearing structure of the wagon-platform is carried out. Findings. Based on the calculations, it is established that the acceleration acting on the load-bearing structure of the wagon-platform car is 0.38 g, i.e. it is within acceptable limits. The results of the calculation of the strength of the improved design of the wagon-platform showed that the maximum equivalent stresses occur in the area of interaction of the spine beam frame with the pivot and is about 340 MPa, the maximum displacement made 8.6 mm. That is, the obtained stresses do not exceed the yield strength of the structural material. The results of the modal analysis showed that the values of the natural frequencies of oscillations are within acceptable limits, because the first natural frequency has a value greater than 8 Hz. Originality. The scientific substantiation of improvement of a load-bearing structure of a universal wagon-platform to transportations of bulk cargoes is carried out. Practical value. The conducted research will promote increase in efficiency of operation of railway transport and creation of developments concerning planning of innovative designs of a rolling stock.