Influence of cathode materials on thermal characteristics of lithium-ion batteries
Yuan Yuan, Qian Ma, Xiang‐Qian Zhang, Fan Zhang, Xiangning Song, Hongchuan Xin, Guiru Zhu, Hongzhe Zhang
Sinopec (China) SINOPEC Research Institute of Safety Engineering Co., Ltd. Ministry of Emergency Management of the People's Republic of China Chinese Academy of Sciences
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
In this work, the thermal stability of four types of 18,650 lithium-ion batteries with LiCoO 2 (LCO), LiFePO 4 (LFP), LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) and LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) materials as cathodes are experimentally investigated by the accelerating rate calorimeter (ARC) and the isothermal battery testing calorimeter (iso-BTC) under adiabatic and isothermal conditions, respectively. The thermal runaway danger level of these batteries can be ranked as LCO > NCA > NCM811 >> LFP by judging from the values of T max and HR max, nominal . The higher the nickel and cobalt content, the higher the lithium-ion battery capacity, but the worse the thermal stability. The Q total of NCA is the largest in the complete standard charge and discharge process, due to that the capacity of NCA is significantly higher than that of the other three batteries, resulting in remarkable increase in Q irre proportioned to the square of the current. When the ambient temperature rises, the energy release decreases owing to the decrease in the internal resistance of the battery. These studies are expected to have important implications for the subsequent safe design of commercial lithium-ion batteries with different cathode materials.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Battery Modeling and Management
Advancements in Battery Materials · Thermal and Kinetic Analysis