On Hirth Ring Couplings: Design Principles Including the Effect of Friction
Dario Croccolo, Massimiliano De Agostinis, Stefano Fini, Giorgio Olmi, Francesco Robusto, Nicolò Vincenzi
University of Bologna Giuliani (Italy)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Rings with Hirth couplings are primarily used for the accurate positioning of axial-symmetric components in the machine tool industry and, generally, in mechanical components. It is also possible to use Hirth rings as connection tools. Specific industries with special milling and grinding machines are able to manufacture both tailor made and standard Hirth rings available on stock. Unfortunately, no international standard (for instance ISO, DIN or AGMA) is available for the production and the design of such components. In the best-case scenario, it is possible to find simplified design formulae in the catalogue of the suppliers. The aim of this work is to provide some accurate formulae and computational methods for design to provide better awareness on the limitations and the potential of this type of connection. The work consists of five parts: (i) a review of the base calculation derived mainly from the catalogues of manufacturers; (ii) an improved calculation based on a new analytical method including the friction phenomenon; (iii) an experimentation run for validating the method; (iv) a case study applied to a machine tool; and, (v) a closed form formulation to determine an upper threshold for friction, thus ensuring the Hirth coupling regular performance.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Engineering Structural Analysis Methods
Mechanical Engineering Research and Applications · Advanced Measurement and Metrology Techniques
参考文献 19
此处列出前 3 条
引用本文 20
按被引量排序,此处列出前 3 条