Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding
Vahid Momeni, Sorana Luca, Joamin González-Gutiérrez, Santiago Cano, Emilie Sueur, Zahra Shahroodi, Stephan Schuschnigg, Christian Kukla 等 9 位
Montanuniversität Leoben Commissariat à l'Énergie Atomique et aux Énergies Alternatives Laboratoire d’Innovation pour les Technologies des Énergies Nouvelles et les nanomatériaux Université Grenoble Alpes
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The applications of Nd-Fe-B-based magnets are experiencing significant diversification to achieve efficiency and miniaturization in different technologies. Metal injection molding (MIM) provides new opportunities to manufacture Nd-Fe-B magnets with high geometrical complexity efficiently. In this study, the impacts of the binder system composition and powder loading on the rheological behavior, contamination, and magnetic properties of the Nd-Fe-B MIM parts were investigated. A high-pressure capillary rheometer was used to measure the apparent viscosity and pressure drops for feedstocks with different binder formulations and powder contents. Also, oxygen and carbon contamination, density, and magnetic properties were measured for different feedstock formulations and powder loadings. From the rheological, density, and magnetic properties points of view, the binder system consisting of 45 vol.% LLDPE as backbone was selected as the optimum formulation. The findings indicated that the sample with this binder system and 55 vol.% powder content had a high density (6.83 g/cm3), remanence (0.591 T), and coercivity (744.6 kA/m) compared to other binder compositions. By using 58 vol.% powder loading, the values of density (7.54 g/cm3), remanence (0.618 T), and carbon residue (982 ppm) improved, and a suitable rheological behavior was still observed. Thus, a suitable feedstock formulation was developed.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Magnetic Properties of Alloys
Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties