An Integrated Hydrometallurgical–Electrodialysis Process for High-Purity Lithium Carbonate Recovery from Battery Waste
Jose Luis Aldana, Lourdes Yurramendi, Javier Antoñanzas, Javier Nieto, Carmen del Río
Tecnalia
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The rapid increase in end-of-life lithium-ion batteries demands sustainable recycling routes for lithium recovery. This work presents a novel integrated hydrometallurgical–electrodialysis process designed specifically for recovering lithium from off-specification NMC cathode materials while enabling full reagent recyclability. Selective leaching with oxalic acid was optimised by setting the water-to-oxalic acid dihydrate ratio (H2O/OA·2H2O) to 7.3:1 w/w, achieving 81% lithium extraction at room temperature within 2 h while limiting the co-dissolution of Ni, Co and Mn to 0.2%, 1.6% and 1.7% by weight, respectively. The resulting leachate was processed in a four-chamber electrodialysis cell equipped with two Nafion 117 cation-exchange membranes and one Neosepta AMX-fmg anion-exchange membrane operating at −1.6 V versus Ag/AgCl, enabling 96% lithium recovery and 98% oxalic acid recovery. The regenerated oxalic acid stream (41.8 g L−1) was fully restored to its initial concentration and reused in successive cycles without performance loss. Subsequent precipitation of lithium with Na2CO3 yielded 99.3%-pure Li2CO3. This combined leaching–electrodialysis–precipitation presents a high selectivity, low-waste, circular recovery system, offering a scientifically original approach that integrates reagent regeneration with high-purity lithium production.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Extraction and Separation Processes
Molten salt chemistry and electrochemical processes · Metal Extraction and Bioleaching
参考文献 53
此处列出前 3 条
引用本文 2
按被引量排序,此处列出前 3 条