TGA-FTIR Analysis of Biomass Samples Based on the Thermal Decomposition Behavior of Hemicellulose, Cellulose, and Lignin
Esin Apaydın Varol, Ülker Mutlu
Eskisehir Technical University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The slow pyrolysis characteristics of lignocellulosic biomass and its three major components via a Thermogravimetric Analyzer coupled with a Fourier Transform Infrared Spectrometer (TGA-FTIR) was studied. Different compositions and ratios of cellulose, hemicellulose, and lignin, olive pomace, sunflower waste, and pinecone were selected. The main decomposition temperature ranges of xylose (hemicellulose) and lignin showed a broad range between 173–690 and 170–835 °C, respectively, whereas that of cellulose was detected to be 291–395 °C. All biomass samples presented a three-stage pyrolysis model that is explained by the superposition of the weight losses of major components. Simultaneous FTIR analysis of the evolved gases demonstrated that the greater the cellulose and hemicellulose contents, the higher the CO and CO2 concentrations. Chemical kinetics were computed with the Coats–Redfern model. The activation energy required for the initiation of the thermal decomposition of biomass samples is in the range of 53–94 kJ/mol. Moreover, the product yields of all samples were determined via laboratory-scale pyrolysis. Pyrolytic oil and char yields were determined to be between 18.9–32.4 wt.% and 26.6–31.2 wt.%, respectively, at 550 °C final temperature for the biomass samples. It is concluded that the bio-oil yield was not only controlled by the cellulose content but also affected by the presence of n-hexane soluble (oil) fraction as well as inorganics.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Thermochemical Biomass Conversion Processes
Thermal and Kinetic Analysis · Biofuel production and bioconversion