Optimal Design of a Liquid Hydrogen Centrifugal Pump Impeller
Catur Harsito, Jeong-Eui Yun, Joon-Young Shin, Jae-Min Kim
Sebelas Maret University Kangwon National University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Global energy consumption has continued to increase in recent years with economic development. Fossil energy sources are now being replaced with renewable energy, and hydrogen is one of such alternatives. Pumps are used for storage, transportation, and distribution. One such pump is the liquefied hydrogen centrifugal pump. In this study, optimisation design of a liquefied hydrogen centrifugal pump was performed using the response surface method, which is the optimisation method of the DesignXplorer provided by ANSYS, based on the flow analysis results of the impeller of the centrifugal pump. The design variables used in the optimisation process are the outlet width b2, % of the blade thickness Su2, leading edge inclination angle α, hub inclination angle δ, wrap angle θ, and outlet blade angle β2. The optimisation analysis results obtained confirmed that all the selected design variables are semi-galactic and are sensitive to pump efficiency and head. It was confirmed that the efficiency of the centrifugal pump achieved using liquefied hydrogen as the working fluid is approximately 82.4%, which is significantly higher than that achieved by a centrifugal pump using water as the working fluid under the same operating conditions.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Turbomachinery Performance and Optimization
Cavitation Phenomena in Pumps · Spacecraft and Cryogenic Technologies
参考文献 29
此处列出前 3 条
引用本文 11
按被引量排序,此处列出前 3 条