Flow-Field Characterization of Multiple Low-Density Gas Jets Impinging on a Wall at a Short Distance Using PIV

This paper studies the dynamics of a low-density gas directly injected onto a flat wall, focusing on the influence of different pressure ratios (PRs) and plate position. Due to safety reasons, Helium (He) was employed as substitute to reproduce the mixing characteristics of hydrogen. A Nd:YAG laser has been used to generate the luminous background in the constant volume chamber (CVC) and vegetable oil particles as trackers to identify the induced flow-field. Two configurations were investigated: the first, with a flat wall perpendicularly positioned at an axial distance of 10 mm from the injector tip, and the second with the same plate at 30 mm downstream of the injector, inclined at 30°. The pressure of injection was swept from 20 to 50 bar, while the backpressure inside the CVC ranged from 2 to 6 bar to enable the reproduction of five different values of PRs: 3, 4, 7, 10 and 17. The comparison of the results in the two configurations has highlighted the role of the plate at short distance in decelerating the jet speed (230 m/s to 160 m/s) while improving the vorticity intensity (+10%). In addition, a stagnation region was observed to form on the flat wall, downstream of the injector axis for 10 mm configuration. In this area the velocity ranged from 50% to 60% compared to the average jet speed. This phenomenon was noted to be less pronounced with the 30 mm, 30° configuration that led to a more contained speed reduction to 150–160%.