Experimental Study on Motion Characteristics of Cavity Attached to the Tail of Underwater Vehicle
Xiongliang Yao, Zhaoyu Qu, Guihui Ma, Nana Yang, Xiaobo Quan, Shaohua Cheng
Harbin Engineering University China Academy of Launch Vehicle Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The formation and development of an attached cavity at the tail of an underwater moving vehicle involves a complex multiphase flow, which determines the load characteristics and motion stability of the vehicle. In this study, an experimental method was used to explore the formation process and motion characteristics of the cavity at the tail of the vehicle, and a pressure sensor installed at the tail of the model was used to establish the relationship between the evolution of the tail attachment cavity and transient pressure. The study found that the process of pulling and breaking the attached cavity was accompanied by the generation of bidirectional jets, and reducing the cavitation number could weaken the occurrence of jet impact. When the ventilation flow reaches the critical value Q¯in = 1.28, the cavity pulsates. In addition, increasing the ventilation flow does not increase the size of the tail cavity, and the length of the cavity at the closure increases with the decrease of the cavitation number.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Ship Hydrodynamics and Maneuverability
Cavitation Phenomena in Pumps · Underwater Vehicles and Communication Systems
参考文献 33
此处列出前 3 条
引用本文 29
按被引量排序,此处列出前 3 条