Multiscale Mechanical Heterogeneity and Progressive Failure Mechanisms of Laminated Shale
Pengyu Liu, Cunqi Jia
King Abdullah University of Science and Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Lamination-induced heterogeneity and directional failure complicate mechanical parameter selection for wellbore stability and stimulation in offshore and onshore shale reservoirs. Nanoindentation, directional compression, continuous scratch testing, well-log interpretation, and post-loading computed tomography (CT) were integrated to examine local stiffness, specimen-scale load bearing, and spatial heterogeneity. In the laminated limy shale sample, matrix and lamina Young’s modulus (E) values were 36.90–39.17 and 4.23–18.80 GPa, respectively. Shale uniaxial compressive strength (UCS) ranged from 39.01 to 220.18 MPa. Staged stress drops and sustained post-peak load bearing coexisted with main fractures, intersecting branches, and subparallel fracture surfaces. Mean mechanical specific energy (MSE) values were 205.05 and 315.86 MPa for the laminated and layered limy shale cores, with range-to-mean ratios of approximately 135% and 74%, respectively. The laminated core combined lower mean cutting resistance with larger relative fluctuations. Log-derived UCS varied from 143.87 to 144.65 MPa near the sampling interval, with pronounced strength transitions across a broader depth window. Matrix–lamina stiffness contrasts and interface constraints jointly control directional deformation and load sharing. Stress–strain, acoustic emission and CT observations support an interpretation in which successive local fracture redistributes load through remaining material and compressive fracture contacts, allowing abrupt stress drops to coexist with sustained post-peak deformation. Closely spaced variations in cutting resistance coexist with smoother variations in log-derived UCS, consistent with differences in measurement coverage and the use of empirical conversion relations. Directional UCS and continuous MSE consequently characterize complementary aspects of mechanical heterogeneity: specimen strength and spatial variations in cutting resistance. These findings support the selection of direction-dependent mechanical parameters for wellbore stability assessment and hydraulic stimulation design in unconventional shale reservoirs.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Rock Mechanics and Modeling
Hydraulic Fracturing and Reservoir Analysis · Hydrocarbon exploration and reservoir analysis
参考文献 52
此处列出前 3 条