Surface Integrity in the Grinding of Hardened AISI D2 Steel
Tao Zhang, Qianting Wang, Ningchang Wang, Lan Yan, Feng Jiang, Enlai Zhang, Wuhui Zhou, Hao Gao 等 9 位
Xiamen University of Technology Sinomach (China) Zhengzhou Research Institute for Abrasives & Grinding (China) Huaqiao University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The surface integrity of grinding has a significant influence on the service performance and life of machined parts. In this study, the influence of grinding parameters and the grit size of the grinding wheel on the surface integrity of the hardened steel, including the roughness, microstructure, and hardness of the subsurface and the residual stress of the ground surface, was comprehensively investigated, and the corresponding mechanisms were revealed. The results show that the roughness perpendicular to the grinding direction was significantly larger than that parallel to the grinding direction due to serious side flow, and increasing the grinding speed or reducing the grinding depth was beneficial for reducing the side flow and thus decreasing the roughness. It was found that the grinding temperature dominated the formation of a harder white layer and a softer black layer, and workpiece speed had the smallest effect on the transition of subsurface microstructure compared to grinding speed and depth. It was also found that the increase in workpiece speed, grinding depth, or grinding speed resulted in a transition from compressive to tensile residual stress or an increase in tensile residual stress, and that grinding wheels with finer grit tended to induce compressive residual stress. This study may help to improve surface integrity by optimizing grinding parameters or facilitating the selection of the optimal grinding wheel.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced machining processes and optimization
Advanced Surface Polishing Techniques · Surface Treatment and Residual Stress