Research on Texture Variation Mechanism of Ti-3Al-2.5V Titanium Alloy Tube During Cold-Rolling Process
Huiyan Ge, Yumeng Luo, Boya Wang, Xiaoyun Song, Wenjun Ye, Yang Yu, Y J Li, Songxiao Hui
General Research Institute for Nonferrous Metals (China)
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
To investigate the mechanism of texture formation during the cold rolling of Ti-3Al-2.5V tubes for aerospace hydraulic systems, this study examines the microstructure at various locations of two deformation cones with 'Q' ratios of 1.055 and 1.300, respectively, in a single cold-rolling pass, revealing their continuous texture evolution. The results indicate that the cold-rolling texture primarily forms during the sinking section. A higher 'Q' ratio leads to a stronger tendency for the c-axis of grains to align parallel to the radial direction of the tube, resulting in enhanced radial texture intensity. Beyond influencing texture through dislocation slip, a higher 'Q' ratio also elevates the Schmid factor for {101-2} twinning. This twinning mechanism primarily forms the radial texture by altering the stress state. Consequently, this change not only facilitates twin activation but also modifies the rotation direction of grains during the twinning process. Compared to the cone with a 'Q' ratio of 1.055, the deformation cone with a 'Q' ratio of 1.300 contains a greater number of twins oriented along <0001>//RD, leading to a stronger radial texture in the tube.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Titanium Alloys Microstructure and Properties
Microstructure and mechanical properties · Metallurgy and Material Forming