Formation and Modification of Al2O3 and MnS Inclusions in Al-Killed Gear Steels via Ca Treatment
Haseeb Ahmad, Fengqiu Tang, Zan Yao, Yingtie Xu, Zongze Huang, Baojun Zhao, Xiaodong Ma
The University of Queensland Jiangxi University of Science and Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
A laboratory study was carried out to better understand the factors that contribute to the formation of complex inclusions, as inclusions play an important role during steel production; if not properly managed, inclusions can cause nozzle clogging during continuous casting and also damage the steel’s mechanical properties and machineability. To determine the chemical composition of inclusions that are less detrimental to the machineability of Al-deoxidized and Ca-treated gear steels, thermodynamic calculations and automated scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), as well as electron probe micro-X-ray analysis (EPMA) with the wavelength dispersive spectroscopy (WDS) technique, were utilized. The findings demonstrated that the morphology of inclusions changed from irregular to a more spherical type and the composition also changed to dual oxy-sulfides from pure oxides and sulfides as the Ca concentration in the steel was increased up to 36 ppm. The amount of Pure MnS sulfides also reduced significantly after Ca treatment. The ternary phase diagram and stability diagram for the inclusions revealed that 15–25 ppm Ca is the optimal range for the modification of both oxides and sulfides into the desired morphology and composition under the stipulation that the concentration of O in the steel is maintained at or below 50 ppm.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Metallurgical Processes and Thermodynamics
Iron and Steelmaking Processes · Metallurgy and Cultural Artifacts