Modeling Mold Heat Transfer Phenomena in Continuous Casting of Steel
Ehsan Jebellat, Brian G. Thomas
Colorado School of Mines University of Illinois Urbana-Champaign
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Accurate thermal analysis of steel solidification and heat transfer in the continuous casting mold is essential for understanding and controlling solidification, shell thickness uniformity, interfacial gap phenomena, and defects such as cracks and breakouts. This study investigates heat transfer in a funnel mold slab caster using the in-house thermal model, Con1D. A new methodology is introduced to predict the slag layer roughness, and its effect on interface resistance. To account for the multidimensional thermal behavior near water channels and thermocouples, finite-element models are developed in Abaqus to calibrate Con1D to match three-dimensional calculations of mold heat transfer. After calibration to match plant measurements for one set of casting conditions, Con1D predictions are validated with plant measurements at different casting speeds and mold plate thicknesses. Key outputs analyzed include the heat flux profile, mold and shell temperatures, shell thickness, shell shrinkage, and interfacial parameters such as slag layer thickness. Increasing casting speed causes higher heat flux, higher shell surface and mold temperatures, and decreased shell and slag layer thicknesses. Decreasing mold plate thickness increases heat flux slightly due to reduced thermal resistance of both the mold and interfacial gap. The modeling approach presented here is a powerful methodology to gain quantitative fundamental understanding of mold heat transfer in continuous casting, especially including phenomena in the interfacial gap.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Metallurgical Processes and Thermodynamics
Solidification and crystal growth phenomena · Heat Transfer and Numerical Methods