Auto-Ignition Delay Characteristics of Ammonia Substitution on Methane
Hua Xiao, Aiguo Chen, Yanze Guo, Lifu Zhang, Minghui Zhang, Xi Deng, Jun Li, Wenxuan Ying
Guangzhou Maritime College Guangdong University of Technology Harbin Institute of Technology
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Ammonia is a promising alternative fuel, which is considered to have the potential to substitute conventional fossil fuels. In the present work, auto-ignition characteristics of ammonia substitution on methane are investigated both experimentally and numerically. The auto-ignition procedure of ammonia-substituted methane/air mixtures are measured behind the reflected shock wave in a shock tube experiment system over temperatures from 1355 to 1877 K, pressure up to 5 atm and an equivalence ratio from 0.5 to 2. Numerical simulation studies using a detailed kinetics mechanism are also performed to gain a deep insight into the auto-ignition procedure of ammonia-substituted methane fuel mixtures. The established numerical model is verified with the measured auto-ignition delay time data by experiments. Then, the auto-ignition delay times are predicted under a wider range of conditions such as equivalence ratio, pressure, temperature, etc. In this way, combustion characteristics of such mixtures are investigated. It is found that adding ammonia fuel to methane will not change the autoignition delay time of methane a lot, while it can effectively benefit the reduction of carbon emissions. Finally, sensitivity analyses are performed to provide essential information for the elementary reaction sensitive to the ignition characteristics. The results present in this work can provide fundamental information for combustion application of ammonia-based fuels.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Advanced Combustion Engine Technologies
Combustion and flame dynamics · Combustion and Detonation Processes