A Computational Fluid Dynamics Simulation Study on the Variation of Temperature and Pressure in the Container During the Dry Storage Process of Radioactive Metal Oxides

Radioactive metal oxides are highly radioactive, hygroscopic spent fuel reprocessing products generally stored in container-sealed dry storage. During the storage process of metal oxides, a large amount of heat is generated due to radioactive decay, and helium is produced by α-decay, which leads to an increase in the temperature and pressure of the storage container. In order to ensure the safety of the radioactive metal oxides in the long-term storage process, computational fluid dynamics simulations are used to investigate the effects of storage conditions on the temperature and pressure of the container. Based on a large amount of simulated temperature data under different storage conditions, a power function is used to construct a mathematical model of ventilation speed, ventilation temperature, stack density, loading volume, heating power, water content, and cumulative helium mass versus metal oxide temperature to obtain a safe, reliable, and economical storage method. The results show that reducing the loading volume and increasing the density of metal oxides, increasing the ventilation speed, and lowering the ventilation temperature are beneficial to the heat transfer and cooling in the dry storage process; increasing the density of metal oxides and lowering the water content of metal oxides and increasing the ventilation temperature and speed are beneficial to avoid the high pressure inside the container. Based on the optimized storage conditions, the temperature peak in the storage process occurs near 25 years, and its temperature reaches 527.6 K. The mathematical model of storage temperature constructed in this study has high computational accuracy, and the maximum relative error of storage temperature is less than 1.80%.