An Efficient Method for Laser Welding Depth Determination Using Optical Coherence Tomography
Guanming Xie, Sanhong Wang, Yueqiang Zhang, Biao Hu, Yu Fu, Qifeng Yu, You Li
Shenzhen University China Astronaut Research and Training Center
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Online monitoring of laser welding depth is increasingly important, with the growing demand for the precise welding depth in the field of power battery manufacturing for new energy vehicles. The indirect methods of welding depth measurement based on optical radiation, visual image and acoustic signals in the process zone have low accuracy in the continuous monitoring. Optical coherence tomography (OCT) provides a direct welding depth measurement during laser welding and shows high achievable accuracy in continuous monitoring. Statistical evaluation approach accurately extracts the welding depth from OCT data but suffers from complexity in noise removal. In this paper, an efficient method coupled DBSCAN (Density-Based Spatial Clustering of Application with Noise) and percentile filter for laser welding depth determination was proposed. The noise of the OCT data were viewed as outliers and detected by DBSCAN. After eliminating the noise, the percentile filter was used to extract the welding depth. By comparing the welding depth determined by this approach and the actual weld depth of longitudinal cross section, an average error of less than 5% was obtained. The precise laser welding depth can be efficiently achieved by the method.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Optical Coherence Tomography Applications
Welding Techniques and Residual Stresses · Industrial Vision Systems and Defect Detection