Comparison of Guide to Expression of Uncertainty in Measurement and Monte Carlo Method for Evaluating Gauge Factor Calibration Test Uncertainty of High-Temperature Wire Strain Gauge
Yazhi Zhao, Fengling Zhang, Yanting Ai, Jing Rui Tian, Zhihua Wang
Shenyang Aerospace University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
High-temperature strain gauges are widely used in the strain monitoring of the hot-end components of aero-engines. In the application of strain gauges, the calibration of the gauge factor (GF) is the most critical link. Evaluating the uncertainty of GF is of great significance to the accuracy analysis of measurement results. Firstly, the calibration test of the GF of the Pt-W high-temperature strain gauge was carried out in the range of 25 °C to 900 °C. The real test data required for the uncertainty evaluation were obtained. Secondly, the guide to the expression of uncertainty in measurement (GUM) and the Monte Carlo method (MCM) were used to evaluate the uncertainty of GF calibration test. The evaluation results of GUM and MCM were compared. Finally, the concept of the weight coefficient W was proposed to quantitatively analyze the influence of each input on the uncertainty of the output GF. The main uncertainty source was found, which had important engineering practical significance. The results show that the mean value of GF decreases with the increase in temperature nonlinearly. At 25 °C, GF is 3.29, and at 900 °C, GF decreases to 1.6. Through comparison and verification, the uncertainty interval given by MCM is closer to the real situation. MCM is superior to GUM, which only uses prior information for uncertainty assessment. MCM is more suitable for evaluating GF uncertainty. Among multiple uncertain sources, the weight coefficient W can effectively analyze Δε as the main uncertain source.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
物理Scientific Measurement and Uncertainty Evaluation
Advanced Sensor Technologies Research · Advanced Measurement and Metrology Techniques