Efficient Powder Removal and Micro-Nano Structural Formation in 3D-Printed Porous Titanium Implants for Enhanced Osteogenesis
Jincheng Tang, Sijing Li, Yonglun Liu, Cheng Liu, Guoxian Pei, Lin Wang, Ming Yan, Dewei Zhao
Harbin Institute of Technology Southern University of Science and Technology Affiliated Zhongshan Hospital of Dalian University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Powder bed fusion-laser beam enables the fabrication of patient-specific medical implants; however, the complete removal of residual powders from complex porous architectures remains a major challenge, compromising biological performance. In this study, a high-voltage (90 V) anodic oxidation (AO) surface polishing strategy was developed to achieve efficient powder removal and surface optimization of triply periodic minimal surface gyroid porous titanium implants. AO treatment markedly reduced surface roughness, slightly enlarged the pore size by approximately 30 to 50 μm while maintaining an overall pore size of 300 to 600 μm, and generated a honeycomb-like microstructure favorable for cell adhesion and bone ingrowth. X-ray photoelectron spectroscopy analysis confirmed the formation of a stable and compact TiO 2 film, which enhanced hydrophilicity and negative surface charge, thereby promoting calcium phosphate deposition and osteogenic mineralization. Both in vitro and in vivo evaluations demonstrated significantly improved early-stage cell adhesion, long-term mineralization, and bone regeneration after AO treatment compared with untreated controls. Polished CP-Ti-AU-45 specimens achieved a new bone mineral density of 0.19 g/cm 3 and a bone volume fraction of 33.8%. The molecular mechanism may involve the activation of extracellular matrix–receptor interactions, adhesion plaques, and PI3K–Akt signaling pathways while inhibiting ferroptosis-related signaling pathways, leading to a significant increase in the messenger RNA levels of Runx2 and Mef2c. The AO polishing strategy preserved the mechanical integrity of porous metals while integrating efficient powder removal with surface functionalization, thereby substantially enhancing the osseointegration potential of porous metallic implants.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Bone Tissue Engineering Materials
Surface Treatment and Coatings · Titanium Alloys Microstructure and Properties