Research on Characteristics and Key Design Parameters of a Pilot-Assisted Load Control Valve
Jian Bin Liu, Hai Bo Xie
Zhejiang University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
This paper reports the simulation and experimental results of a type of widely used load control valve. The investigated load control valve is usually applied to the mobile crane booming hydraulic circuit. It is used to balance the overrunning load due to gravity and to modulate the flow of oil when lowering the load. The load control valve has a significant influence on the performance of mobile crane booming system. A simulation model of the load control valve is established based on AMESim, moreover, a bench-test is conducted to evaluate the performance of the load control valve. The simulation results and the experiment data agree well and both results show a good performance of the valve. Further study of the effect and the inner principle of the key design parameters of the load control valve are also presented.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Hydraulic and Pneumatic Systems
Dynamics and Control of Mechanical Systems · Fluid dynamics and aerodynamics studies