Gear Modeling Methodologies for Advancing Prognostic Capabilities in Rotary-Wing Transmission Systems
David B. Stringer, Paul E. Allaire, Pradip N. Sheth
Glenn Research Center University of Virginia
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The development of Prognostic and Health Management Systems (PHMS) with the ability to predict life remaining requires mathematical physics-based modeling algorithms for achieving accuracy. One such model required for enabling this advanced digital architecture in rotorcraft operations is that of the drive train system. Drive trains use gear technology for changing the direction of shaft output and reducing the speed between the power plant and rotor system. Gear dynamics significantly alter the vibration characteristics of rotating shafts and contribute to the noise, component fatigue, and human discomfort in rotorcraft. Predictive algorithms will require databases for analyzing and comparing current signals from components of interest. The sources of these databases include historical data from aircraft components, experimental data, and data gathered from analytical models. Analytical models are particularly useful, because they allow the user to simulate several operating conditions and thus populate the database for a variety of conditions, faults, etc. By validating these models with previous data, it is also possible to simulate conditions for which data or experimental results may be sparse or non-existent. This paper presents a methodology for developing a general 12 degree-of-freedom gear mesh stiffness model for insertion into the dynamic system equations of motion for application to any spur or helical gear application. The complete mesh model is presented in the appendix. The methods of determining the value of the mesh stiffness constant (Kg) are also discussed. The model is then applied to a spur-geared shaft system rotor dynamic application. The natural frequencies and mode shapes are determined and compared to a similar non-geared shaft system. The results show the coupled frequencies of vibrations in the geared system that do not exist in the non-geared system. The coupled frequency mode shapes clearly illustrate the effect of the gear mesh on the system. Several observations are made as to the nature of the coupled frequencies. The effects of gyroscopics, general damping, and friction are also discussed. An investigation into the frequency variation associated with different values of mesh stiffness is conducted and presented, showing how the coupled natural frequencies converge to a single non-coupled frequency at high mesh stiffness values. The application results are then compared to and validated against previously published results in the literature. Finally, a brief discussion follows dealing with ongoing research, further validation of the model, and required steps to integrate the model into a comprehensive rotorcraft transmission model. The techniques for developing this capability involve other techniques using modal analysis which have been validated in the literature; however, the research in this area is still ongoing and not yet complete.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Gear and Bearing Dynamics Analysis
Machine Fault Diagnosis Techniques · Vibration and Dynamic Analysis