A Wireless Volumetric Metamaterial Resonator for Breast MRI

High-performance breast magnetic resonance imaging (MRI) remains limited by the availability, geometry, and cost of dedicated receive coils. In contrast, spine coils are widely installed in MR scanners globally but provide insufficient sensitivity for anterior breast tissue. Here, we report a wireless volumetric metamaterial resonator (VMR) that converts a standard built-in spine coil into a scalable breast MRI receiver platform without modifying the scanner hardware. The VMR consists of axially stacked coaxial resonant rings that support a co-rotating collective mode, producing a centrally concentrated RF magnetic field within the enclosed imaging volume. Leveraging distributed capacitance in the coaxial cable, gap-engineered geometric tuning, and PIN-diode-based self-detuning, the VMR enables size scalability, electric-field confinement, and transmit-receive compatibility, as validated through bench measurements and 3.0 T MRI experiments. Three VMR prototypes spanning small, medium, and large breast-equivalent volumes were designed and evaluated using electromagnetic simulations, bench measurements, and phantom MRI experiments. Compared with a commercial 16-channel breast coil, the VMR-augmented spine coil achieved more than 4-fold higher central SNR and reduced spatial non-uniformity from approximately 70% to 20% within the target imaging region. Under SENSE parallel imaging at acceleration factors of 2-4, the VMR-augmented spine coil maintained an average 4-fold higher central SNR than the commercial coil for three sizes. These results establish the VMR as a passive, scalable hardware strategy for improving breast MRI performance using existing clinical scanner infrastructure.