Fatigue Performance Of Rubberized Stone Matrix Asphalt By A Simplified Viscoelastic Continuum Damage Model
junan shen zhaoxing xie
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The study investigated the fatigue performance of rubberized stone matrix asphalt (SMA) in the dry process and compared its fatigue characterization with SMAs with other typical binders. Five SMA mixtures were used with the following asphalt binders: (1) virgin asphalt of PG 67-22, (2) crumb rubber modifier (CRM) modified in wet process, (3) CRM modified in dry process, (4) terminal-blend binder, and (5) styrene-butadiene-styrene (SBS) modified binder. Dynamic modulus and direct-tension fatigue tests were performed using the asphalt mixture performance tester (AMPT) system. In addition, improved linear amplitude sweep (LAS) tests were performed on the binders by a dynamic shear rheometer (DSR). The fatigue test data were analyzed by the simplified viscoelastic continuum damage (S-VECD) theory. The results showed that (1) dynamic modulus of the rubberized SMA in the dry process was similar to that of the wet process and higher than that of SMAwith virgin asphalt, although a little lower than those of SMAs with terminal-blend binder or SBS binder at high temperatures; (2) the damage resistance and fatigue life of the rubberized SMA in the dry process are higher than those of SMAwith virgin asphalt and similar or slightly higher than with the wet process, but lower than SMAs with terminal-blend binder or SBS binder; and (3) the virgin binder had lower damage resistance and fatigue life, followed by the CRM binder in the wet process, the terminal-blend binder and SBS binder had higher damage resistance and fatigue life. This is consistent with the mixture results for the direct-tension fatigue tests.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Asphalt Pavement Performance Evaluation
Fatigue and fracture mechanics · Innovative concrete reinforcement materials