Diseño termo-hidráulico de un intercambiador de calor de carcasa y tubos para refrigeración con ácido acrílico.
Amaury Pérez Sánchez, Laura Thalia Alvarez Lores, Laura de la Caridad Arias Águila, Lizthalía Jiménez Guerra
University of Camagüey
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Shell and tube heat exchangers (STHE) in their various manifestations are undoubtedly the most widely and commonly used heat transfer equipment in the chemical processing industries. The objective of the present work is to design, from the thermo-hydraulic point of view, a 1-2 STHE to cool 50,000 kg/h of an acrylic acid stream from 97 to 40 ºC using water as coolant at an inlet temperature of 25 ºC. The proposed STHE will present a heat transfer area of 284.29 m2, an overall heat transfer coefficient of 364.26 W/m2.K, a number of tubes of 702, a bundle diameter of 975.62 mm, and a shell diameter of 1,047.62 mm. The selected type of STHE is split-ring floating head, the heat load has a value of 1,733.59 kW, it will be required 20.74 kg/s (74,664 kg/h) of cooling water to carry out the heat transfer service, while the values of the pressure drop of both the water (402.54 Pa) and the acrylic acid (2,479.27 Pa) are below the maximum allowable limits set by the heat exchange process, which are 1,000 Pa and 3,000 Pa for the water and acrylic acid, respectively. The designed STHE will has a purchase cost of USD $ 101,209.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Heat Transfer and Optimization
Heat Transfer and Boiling Studies · Heat Transfer and Numerical Methods