A whole row automatic pick-up device using air force to blow out vegetable plug seedlings
Hanping Mao, Guoxin Ma, Luhua Han, Jianping Hu, Feng Gao, Yang Liu
Jiangsu University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Aim of study: To develop a whole row automatic pick-up device using air force to blow out plug seedlings, to avoid the damage to seedlings that the current way of seedling picking by needle insertion induces.Area of study: Jiangsu Province, China.Material and methods: We designed a pick-up device which mainly consists of a seedling transporting device, a seedling air loosening device, a seedling clamping device and an automatic control system. The damage rate of seedling was significantly reduced and the success rate of seedling picking was increased by using the new seedling air loosening method and the new designed end-effectors. A prototype of the new pick-up device was produced according to the calculation results, and the performance tests were arranged under actual production conditions in an indoor laboratory.Main results: The calculation showed that when the diameter of the blowhole in air nozzle is 3.5 mm, and the air pressure is between 0.146 MPa and 0.315 MPa, the seedlings can be blown out successfully. Besides, the clamping strain test showed that the new designed end-effector can meet the requirements of seedling picking. The orthogonal test showed that both the air pressure and water content significantly affected the success ratio. The success ratio reached 96.64% when air pressure was 0.4 MPa, water content was 55%-60% and airflow rate was 100%, what meets the current requirements of transplanting.Research highlights: This research can provide some references for the automatic transplanting technology.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Soil Mechanics and Vehicle Dynamics
Agricultural Engineering and Mechanization
参考文献 18
此处列出前 3 条
引用本文 18
按被引量排序,此处列出前 3 条