A roadmap for metrology interoperability
作者信息待补充
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
The Integrated Manufacturing Technology Initiative (IMTI, Inc.) produced this report for the National Institute of Standards and Technology (NIST).The purpose of this document is to provide a roadmap that examines the current state of interoperability in the dimensional metrology process, presents a future vision for ideal metrology interoperability, identifies the key issues and major barriers to achieving interoperability goals, and poses solutions that will address the issues and remove the barriers to metrology interoperability.Primary input for this report was gathered at the International Metrology Interoperability Summit (IMIS) and the concurrent workshop, conducted March 28-30, 2006 at NIST in Gaithersburg, MD.This document is a work in progress.Due to time constraints at the workshop, some elements of the roadmap were not completed.These elements include:• Actions (specific tasks) needed to implement a solution to a problem or an issue, • Assessments of technology readiness levels for proposed solutions, • Timeframes and durations for specific solutions, and • Estimated costs to implement specific solutions.Many of the technical issues are controversial, and much additional discussion is needed to build consensus for recommended solutions and to capture the needed information for a comprehensive roadmap.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Advanced Measurement and Metrology Techniques
Manufacturing Process and Optimization · Scientific Measurement and Uncertainty Evaluation