Disulfide bonds modified epoxy resins: mechanical, adhesion and wear properties
Salsabeel Burhan, Zoalfokkar Kareem Alobad, Ammar Emad Al-Kawaz
University of Babylon Al-Furat Al-Awsat Technical University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Epoxy occupies an important place in many engineering applications, so it is necessary to improve its properties such as adhesion strength, wear resistance, and toughness. In this study epoxy was modified by incorporation of disulfide bonds. A coating layer was prepared by adding ethanol disulfide to epoxy resin at various weight percent: 0.5, 1.5, 2.5 and 3.5 wt.%. Fourier-transform infrared spectroscopy was employed to investigate any chemical interaction. Differential scanning colometry (DSC) analysis provides valuable information about thermal behaviour of the prepared epoxy coating. Tensile, hardness, impact, fracture toughness and adhesion properties were tested. Wear behaviour was investigated by pin-on-disc device. Results show that epoxy containing disulfide bonds (EP+SS) offering excellent impact resistance with good fracture toughness compared to neat epoxy. Additionally, contact angle test results show an enhancement of wettability between the modified epoxy coating layer and steel substrate. Adhesion strength of epoxy layer enhanced by incorporating ethanol disulfide into epoxy resin reaching a superior value. Comparison to neat epoxy, the coefficient of friction of (EP+SS) highly decreased reaching about 89% and wear rate decreased by 76% as the percentage of the added ethanol disulphide increases. In conclusion, a tough superior adhesive epoxy coating layer was synthesised by incorporation of the ethanol disulfide compound into epoxy resin.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
材料 / 化学Epoxy Resin Curing Processes
Polymer Science and Applications · Material Properties and Applications
参考文献 18
此处列出前 3 条
引用本文 2
按被引量排序,此处列出前 3 条