Electronic structure modulation of Fe-Ni 2 P@CoP heterojunction for efficient industrial water electrolysis toward hydrogen production
Xin Li, Jia Shi, Yang Li, Zhixin Dai, Ning Li, Yangqin Gao, Lei Ge
China University of Petroleum, Beijing State Key Laboratory of Heavy Oil
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
Using anion exchange membrane water electrolysis (AEMWE) technology to produce hydrogen is one of the effective pathways for future energy development. Designing efficient and stable anode oxygen evolution reaction (OER) catalysts is crucial for improving hydrogen production efficiency. In this study, Fe-doped Ni2P material was designed using a MOF as a precursor, and then combined with CoP nanowire arrays to form Fe-Ni2P@CoP heterojunction composite. Different from previous reports, this work features precise Fe doping (~3.6 at%), a unique 0D/1D morphology, and systematic AEMWE evaluation at 1.0 A cm-2. It is found that doping and interface engineering induce charge transfer between Fe atoms and the heterojunction interfaces, optimizing the overall electronic structure and enhancing the adsorption of reaction intermediates at the active sites, thereby improving electrocatalytic performance. The Fe-Ni2P@CoP catalyst demonstrates highly efficient OER activity and requires only 276 mV overpotential to achieve a current density of 100 mA cm-2, maintaining stability for 100 hours. Subsequently, it is assembled with Pt/C into an AEM electrolyzer, achieving a cell voltage of only 1.77 V at a high current density of 1.0 A cm-2 relevant to industrial applications, demonstrating promising potential for industrial hydrogen production under specific AEMWE operating conditions.
逐年被引趋势
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Electrocatalysts for Energy Conversion
Fuel Cells and Related Materials · CO2 Reduction Techniques and Catalysts