APPLICATION OF IMPACT DRIVE MECHANISM (IDM) ON A FLAPPING WING MECHANISM OF A MICRO AERIAL VEHICLE (MAV)
Hilmi Kuşçu, Ulaş Kaya
Trakya University
阅读操作
确认中在文库中上传 PDF 后可生成中文音频讲解。
摘要与影响
IDM is a method that transforms small vibrations of a piezo element into continuous linear motion as experimentally proven in our previous study [1]. Although theoretically and experimentally it is possible for IDM to move the piezo element in two directions continuously, the weight of required hardware to reverse the signal thus the direction, the fixed poles of piezo-crystal and the low velocity of piezo element during IDM application to reach the required frequency of flapping makes it difficult to use two-direction or direct sliding mechanisms for MAV applications. In this study, a flapping wing mechanism is designed which is actuated by one-directional motion of a piezo element by applying method of IDM. For IDM to be applied in one-direction motion of piezo element a continuous surface is required. A steel fixed cylinder’s outer surface selected as continuous surface to provide piezo element to move rotationally and continuously. Another lightweight cylinder with spur gear one end placed coincident with the steel fixed one. The lightweight cylinder can move rotationally around the fixed steel one while constrained to move in longitudinal direction and connected to piezo element. So, while piezo rotates around the fixed steel cylinder, it actuates the gear with the rotation of lightweight cylinder. The velocity of this gear is amplified with a gear-train. And finally, a crank-rod mechanism was employed to flap the wings of the MAV. After theoretical calculations, the two- and three-dimensional drawings, and kinematic and dynamic simulations were carried out by using “Autodesk Inventor Professional” software. All the parts of this wing mechanism are designed as manufacturable with the conventional manufacturing methods including 3d printing, machining (lathe and milling), composite resin transfer molding. The research conducted here could be supportive when dc motors could not be used to drive MAV wing mechanisms because of environmental conditions.
逐年被引趋势
暂无年度引用数据
关键指标
同类平均 = 1
同领域 · 同年份 · 同类型
Google Scholar 与 OpenAlex 的被引统计范围不同,数值存在差异属正常。
AI 辅助阅读
依据:摘要
可就本文提问;依据不足时会说明。
学术脉络
学科主题
工程Biomimetic flight and propulsion mechanisms
Aeroelasticity and Vibration Control · Advanced MEMS and NEMS Technologies